# #############################################
# #
# dnscrypt-proxy configuration        #
# #
# #############################################

listen_addresses = [ "127.0.0.1:5533" ]
# # Maximum number of simultaneous client connections to accept
max_clients = 250
# # Switch to a different system user after listening sockets have been created.
# # Note (1): this feature is currently unsupported on Windows.
# # Note (2): this feature is not compatible with systemd socket activation.
# # Note (3): when using -pidfile, the PID file directory must be writable by the new user
# user_name = 'nobody'
# # Require servers (from remote sources) to satisfy specific properties
# Use servers reachable over IPv4
ipv4_servers = true
# Use servers reachable over IPv6 -- Do not enable if you don't have IPv6 connectivity
ipv6_servers = false
# Use servers implementing the DNSCrypt protocol
dnscrypt_servers = true
# Use servers implementing the DNS-over-HTTPS protocol
doh_servers = true
# Use servers implementing the Oblivious DoH protocol
odoh_servers = false
# # Require servers defined by remote sources to satisfy specific properties
# Server must support DNS security extensions (DNSSEC)
require_dnssec = false
# Server must not log user queries (declarative)
require_nolog = true
# Server must not enforce its own blocklist (for parental control, ads blocking...)
require_nofilter = true
# Server names to avoid even if they match all criteria
disabled_server_names = []
# # Always use TCP to connect to upstream servers.
# # This can be useful if you need to route everything through Tor.
# # Otherwise, leave this to `false`, as it doesn't improve security
# # (dnscrypt-proxy will always encrypt everything even using UDP), and can
# # only increase latency.
force_tcp = false
# # SOCKS proxy
# # Uncomment the following line to route all TCP connections to a local Tor node
# # Tor doesn't support UDP, so set `force_tcp` to `true` as well.
# proxy = 'socks5://127.0.0.1:9050'
# # HTTP/HTTPS proxy
# # Only for DoH servers
# http_proxy = 'http://127.0.0.1:8888'
# # How long a DNS query will wait for a response, in milliseconds.
# # If you have a network with *a lot* of latency, you may need to
# # increase this. Startup may be slower if you do so.
# # Don't increase it too much. 10000 is the highest reasonable value.
timeout = 5000
# # Keepalive for HTTP (HTTPS, HTTP/2) queries, in seconds
keepalive = 30
# # Add EDNS-client-subnet information to outgoing queries
# #
# # Multiple networks can be listed; they will be randomly chosen.
# # These networks don't have to match your actual networks.
# edns_client_subnet = ["0.0.0.0/0", "2001:db8::/32"]
# # Response for blocked queries. Options are `refused`, `hinfo` (default) or
# # an IP response. To give an IP response, use the format `a:<IPv4>,aaaa:<IPv6>`.
# # Using the `hinfo` option means that some responses will be lies.
# # Unfortunately, the `hinfo` option appears to be required for Android 8+
# blocked_query_response = 'refused'
# # Load-balancing strategy: 'p2' (default), 'ph', 'p<n>', 'first' or 'random'
# # Randomly choose 1 of the fastest 2, half, n, 1 or all live servers by latency.
# # The response quality still depends on the server itself.
# lb_strategy = 'p2'
# # Set to `true` to constantly try to estimate the latency of all the resolvers
# # and adjust the load-balancing parameters accordingly, or to `false` to disable.
# # Default is `true` that makes 'p2' `lb_strategy` work well.
# lb_estimator = true
# # Log level (0-6, default: 2 - 0 is very verbose, 6 only contains fatal errors)
# log_level = 2
# # Log file for the application, as an alternative to sending logs to
# # the standard system logging service (syslog/Windows event log).
# #
# # This file is different from other log files, and will not be
# # automatically rotated by the application.
# log_file = 'dnscrypt-proxy.log'
# # When using a log file, only keep logs from the most recent launch.
# log_file_latest = true
# # Use the system logger (syslog on Unix, Event Log on Windows)
# use_syslog = true
# # Delay, in minutes, after which certificates are reloaded
cert_refresh_delay = 240
# # DNSCrypt: Create a new, unique key for every single DNS query
# # This may improve privacy but can also have a significant impact on CPU usage
# # Only enable if you don't have a lot of network load
# dnscrypt_ephemeral_keys = false
# # DoH: Disable TLS session tickets - increases privacy but also latency
# tls_disable_session_tickets = false
# # DoH: Use a specific cipher suite instead of the server preference
# # 49199 = TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
# # 49195 = TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
# # 52392 = TLS_ECDHE_RSA_WITH_CHACHA20_POLY1305
# # 52393 = TLS_ECDHE_ECDSA_WITH_CHACHA20_POLY1305
# #  4865 = TLS_AES_128_GCM_SHA256
# #  4867 = TLS_CHACHA20_POLY1305_SHA256
# #
# # On non-Intel CPUs such as MIPS routers and ARM systems (Android, Raspberry Pi...),
# # the following suite improves performance.
# # This may also help on Intel CPUs running 32-bit operating systems.
# #
# # Keep tls_cipher_suite empty if you have issues fetching sources or
# # connecting to some DoH servers. Google and Cloudflare are fine with it.
# tls_cipher_suite = [52392, 49199]
# # Bootstrap resolvers
# #
# # These are normal, non-encrypted DNS resolvers, that will be only used
# # for one-shot queries when retrieving the initial resolvers list and if
# # the system DNS configuration doesn't work.
# #
# # No user queries will ever be leaked through these resolvers, and they will
# # not be used after IP addresses of DoH resolvers have been found (if you are
# # using DoH).
# #
# # They will never be used if lists have already been cached, and if the stamps
# # of the configured servers already include IP addresses (which is the case for
# # most of DoH servers, and for all DNSCrypt servers and relays).
# #
# # They will not be used if the configured system DNS works, or after the
# # proxy already has at least one usable secure resolver.
# #
# # Resolvers supporting DNSSEC are recommended, and, if you are using
# # DoH, bootstrap resolvers should ideally be operated by a different entity
# # than the DoH servers you will be using, especially if you have IPv6 enabled.
# #
# # People in China may want to use 114.114.114.114:53 here.
# # Other popular options include 8.8.8.8, 9.9.9.9 and 1.1.1.1.
# #
# # If more than one resolver is specified, they will be tried in sequence.
# #
# # TL;DR: put valid standard resolver addresses here. Your actual queries will
# # not be sent there. If you're using DNSCrypt or Anonymized DNS and your
# # lists are up to date, these resolvers will not even be used.
bootstrap_resolvers = [ '9.9.9.9:53', '8.8.8.8:53' ]
# # Always use the bootstrap resolver before the system DNS settings.
ignore_system_dns = true
# # Maximum time (in seconds) to wait for network connectivity before
# # initializing the proxy.
# # Useful if the proxy is automatically started at boot, and network
# # connectivity is not guaranteed to be immediately available.
# # Use 0 to not test for connectivity at all (not recommended),
# # and -1 to wait as much as possible.
netprobe_timeout = 60
# # Address and port to try initializing a connection to, just to check
# # if the network is up. It can be any address and any port, even if
# # there is nothing answering these on the other side. Just don't use
# # a local address, as the goal is to check for Internet connectivity.
# # On Windows, a datagram with a single, nul byte will be sent, only
# # when the system starts.
# # On other operating systems, the connection will be initialized
# # but nothing will be sent at all.
netprobe_address = '9.9.9.9:53'
# # Offline mode - Do not use any remote encrypted servers.
# # The proxy will remain fully functional to respond to queries that
# # plugins can handle directly (forwarding, cloaking, ...)
# offline_mode = false
# # Additional data to attach to outgoing queries.
# # These strings will be added as TXT records to queries.
# # Do not use, except on servers explicitly asking for extra data
# # to be present.
# # encrypted-dns-server can be configured to use this for access control
# # in the [access_control] section
# query_meta = ['key1:value1', 'key2:value2', 'token:MySecretToken']
# # Automatic log files rotation
# Maximum log files size in MB - Set to 0 for unlimited.
log_files_max_size = 10
# How long to keep backup files, in days
log_files_max_age = 7
# Maximum log files backups to keep (or 0 to keep all backups)
log_files_max_backups = 1
# ########################
# Filters        #
# ########################
# # Note: if you are using dnsmasq, disable the `dnssec` option in dnsmasq if you
# # configure dnscrypt-proxy to do any kind of filtering (including the filters
# # below and blocklists).
# # You can still choose resolvers that do DNSSEC validation.
# # Immediately respond to IPv6-related queries with an empty response
# # This makes things faster when there is no IPv6 connectivity, but can
# # also cause reliability issues with some stub resolvers.
block_ipv6 = false
# # Immediately respond to A and AAAA queries for host names without a domain name
block_unqualified = true
# # Immediately respond to queries for local zones instead of leaking them to
# # upstream resolvers (always causing errors or timeouts).
block_undelegated = true
# # TTL for synthetic responses sent when a request has been blocked (due to
# # IPv6 or blocklists).
reject_ttl = 10
# #################################################################################
# Route queries for specific domains to a dedicated set of servers        #
# #################################################################################
# # See the `example-forwarding-rules.txt` file for an example
# forwarding_rules = 'forwarding-rules.txt'
# ##############################
# Cloaking rules       #
# ##############################
# # Cloaking returns a predefined address for a specific name.
# # In addition to acting as a HOSTS file, it can also return the IP address
# # of a different name. It will also do CNAME flattening.
# #
# # See the `example-cloaking-rules.txt` file for an example
# cloaking_rules = 'cloaking-rules.txt'
# # TTL used when serving entries in cloaking-rules.txt
# cloak_ttl = 600
# ##########################
# DNS cache        #
# ##########################
# # Enable a DNS cache to reduce latency and outgoing traffic
cache = true
# # Cache size
cache_size = 4096
cache_min_ttl = 60
cache_max_ttl = 120
cache_neg_min_ttl = 60
cache_neg_max_ttl = 120
log_level = 6
lb_strategy = "ph"

# # dnscrypt-proxy can act as a local DoH server. By doing so, web browsers
# # requiring a direct connection to a DoH server in order to enable some
# # features will enable these, without bypassing your DNS proxy.
# # Addresses that the local DoH server should listen to
# listen_addresses = ['127.0.0.1:3000']
# # Path of the DoH URL. This is not a file, but the part after the hostname
# # in the URL. By convention, `/dns-query` is frequently chosen.
# # For each `listen_address` the complete URL to access the server will be:
# # `https://<listen_address><path>` (ex: `https://127.0.0.1/dns-query`)
# path = '/dns-query'
# # Certificate file and key - Note that the certificate has to be trusted.
# # See the documentation (wiki) for more information.
# cert_file = 'localhost.pem'
# cert_key_file = 'localhost.pem'
# ##############################
# Query logging        #
# ##############################
# # Log client queries to a file
[query_log]
# # Path to the query log file (absolute, or relative to the same directory as the config file)
# # Can be set to /dev/stdout in order to log to the standard output.
# file = 'query.log'
# # Query log format (currently supported: tsv and ltsv)
format = 'tsv'

# # Do not log these query types, to reduce verbosity. Keep empty to log everything.
# ignored_qtypes = ['DNSKEY', 'NS']
# ###########################################
# Suspicious queries logging        #
# ###########################################
# # Log queries for nonexistent zones
# # These queries can reveal the presence of malware, broken/obsolete applications,
# # and devices signaling their presence to 3rd parties.
[nx_log]
# # Path to the query log file (absolute, or relative to the same directory as the config file)
# file = 'nx.log'
# # Query log format (currently supported: tsv and ltsv)
format = 'tsv'

# [schedules.'time-to-sleep']
# mon = [{after='21:00', before='7:00'}]
# tue = [{after='21:00', before='7:00'}]
# wed = [{after='21:00', before='7:00'}]
# thu = [{after='21:00', before='7:00'}]
# fri = [{after='23:00', before='7:00'}]
# sat = [{after='23:00', before='7:00'}]
# sun = [{after='21:00', before='7:00'}]
# [schedules.'work']
# mon = [{after='9:00', before='18:00'}]
# tue = [{after='9:00', before='18:00'}]
# wed = [{after='9:00', before='18:00'}]
# thu = [{after='9:00', before='18:00'}]
# fri = [{after='9:00', before='17:00'}]
# ########################
# Servers        #
# ########################
# # Remote lists of available servers
# # Multiple sources can be used simultaneously, but every source
# # requires a dedicated cache file.
# #
# # Refer to the documentation for URLs of public sources.
# #
# # A prefix can be prepended to server names in order to
# # avoid collisions if different sources share the same for
# # different servers. In that case, names listed in `server_names`
# # must include the prefixes.
# #
# # If the `urls` property is missing, cache files and valid signatures
# # must already be present. This doesn't prevent these cache files from
# # expiring after `refresh_delay` hours.
# # Cache freshness is checked every 24 hours, so values for 'refresh_delay'
# # of less than 24 hours will have no effect.
# # A maximum delay of 168 hours (1 week) is imposed to ensure cache freshness.
[sources]
# # An example of a remote source from https://github.com/DNSCrypt/dnscrypt-resolvers
[sources.public-resolvers]
urls = [ 'https://raw.githubusercontent.com/DNSCrypt/dnscrypt-resolvers/master/v3/public-resolvers.md', 'https://download.dnscrypt.info/resolvers-list/v3/public-resolvers.md', 'https://ipv6.download.dnscrypt.info/resolvers-list/v3/public-resolvers.md', 'https://download.dnscrypt.net/resolvers-list/v3/public-resolvers.md' ]
cache_file = 'public-resolvers.md'
minisign_key = 'RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3'
refresh_delay = 72
prefix = ''

# # Anonymized DNS relays
[sources.relays]
urls = [ 'https://raw.githubusercontent.com/DNSCrypt/dnscrypt-resolvers/master/v3/relays.md', 'https://download.dnscrypt.info/resolvers-list/v3/relays.md', 'https://ipv6.download.dnscrypt.info/resolvers-list/v3/relays.md', 'https://download.dnscrypt.net/resolvers-list/v3/relays.md' ]
cache_file = 'relays.md'
minisign_key = 'RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3'
refresh_delay = 72
prefix = ''

# # ODoH (Oblivious DoH) servers and relays
# [sources.'odoh-servers']
# urls = ['https://raw.githubusercontent.com/DNSCrypt/dnscrypt-resolvers/master/v3/odoh-servers.md', 'https://download.dnscrypt.info/resolvers-list/v3/odoh-servers.md', 'https://ipv6.download.dnscrypt.info/resolvers-list/v3/odoh-servers.md', 'https://download.dnscrypt.net/resolvers-list/v3/odoh-servers.md']
# cache_file = 'odoh-servers.md'
# minisign_key = 'RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3'
# refresh_delay = 24
# prefix = ''
# [sources.'odoh-relays']
# urls = ['https://raw.githubusercontent.com/DNSCrypt/dnscrypt-resolvers/master/v3/odoh-relays.md', 'https://download.dnscrypt.info/resolvers-list/v3/odoh-relays.md', 'https://ipv6.download.dnscrypt.info/resolvers-list/v3/odoh-relays.md', 'https://download.dnscrypt.net/resolvers-list/v3/odoh-relays.md']
# cache_file = 'odoh-relays.md'
# minisign_key = 'RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3'
# refresh_delay = 24
# prefix = ''
# # Quad9
# [sources.quad9-resolvers]
# urls = ['https://www.quad9.net/quad9-resolvers.md']
# minisign_key = 'RWQBphd2+f6eiAqBsvDZEBXBGHQBJfeG6G+wJPPKxCZMoEQYpmoysKUN'
# cache_file = 'quad9-resolvers.md'
# prefix = 'quad9-'
# # Another example source, with resolvers censoring some websites not appropriate for children
# # This is a subset of the `public-resolvers` list, so enabling both is useless
# [sources.'parental-control']
# urls = ['https://raw.githubusercontent.com/DNSCrypt/dnscrypt-resolvers/master/v3/parental-control.md', 'https://download.dnscrypt.info/resolvers-list/v3/parental-control.md', 'https://ipv6.download.dnscrypt.info/resolvers-list/v3/parental-control.md', 'https://download.dnscrypt.net/resolvers-list/v3/parental-control.md']
# cache_file = 'parental-control.md'
# minisign_key = 'RWQf6LRCGA9i53mlYecO4IzT51TGPpvWucNSCh1CBM0QTaLn73Y7GFO3'
# ########################################
# Servers with known bugs        #
# ########################################
[broken_implementations]
# Cisco servers currently cannot handle queries larger than 1472 bytes, and don't
# truncate reponses larger than questions as expected by the DNSCrypt protocol.
# This prevents large responses from being received over UDP and over relays.
# 
# Older versions of the `dnsdist` server software had a bug with queries larger
# than 1500 bytes. This is fixed since `dnsdist` version 1.5.0, but
# some server may still run an outdated version.
# 
# The list below enables workarounds to make non-relayed usage more reliable
# until the servers are fixed.
fragments_blocked = [ 'cisco', 'cisco-ipv6', 'cisco-familyshield', 'cisco-familyshield-ipv6', 'cleanbrowsing-adult', 'cleanbrowsing-adult-ipv6', 'cleanbrowsing-family', 'cleanbrowsing-family-ipv6', 'cleanbrowsing-security', 'cleanbrowsing-security-ipv6' ]

# 
# creds = [
# { server_name='*', client_cert='client.crt', client_key='client.key' }
# ]
# ###############################
# Anonymized DNS        #
# ###############################
[anonymized_dns]
# # Routes are indirect ways to reach DNSCrypt servers.
# #
# # A route maps a server name ("server_name") to one or more relays that will be
# # used to connect to that server.
# #
# # A relay can be specified as a DNS Stamp (either a relay stamp, or a
# # DNSCrypt stamp) or a server name.
# #
# # The following example routes "example-server-1" via `anon-example-1` or `anon-example-2`,
# # and "example-server-2" via the relay whose relay DNS stamp is
# # "sdns://gRIxMzcuNzQuMjIzLjIzNDo0NDM".
# #
# # !!! THESE ARE JUST EXAMPLES !!!
# #
# # Review the list of available relays from the "relays.md" file, and, for each
# # server you want to use, define the relays you want connections to go through.
# #
# # Carefully choose relays and servers so that they are run by different entities.
# #
# # "server_name" can also be set to "*" to define a default route, for all servers:
# # { server_name='*', via=['anon-example-1', 'anon-example-2'] }
# #
# # If a route is ["*"], the proxy automatically picks a relay on a distinct network.
# # { server_name='*', via=['*'] } is also an option, but is likely to be suboptimal.
# #
# # Manual selection is always recommended over automatic selection, so that you can
# # select (relay,server) pairs that work well and fit your own criteria (close by or
# # in different countries, operated by different entities, on distinct ISPs...)
# routes = [
# { server_name='example-server-1', via=['anon-example-1', 'anon-example-2'] },
# { server_name='example-server-2', via=['sdns://gRIxMzcuNzQuMjIzLjIzNDo0NDM'] }
# ]
# Skip resolvers incompatible with anonymization instead of using them directly
skip_incompatible = false